Pre-load a fixed amount per card, so a PropellerAds top-up never runs past your offer test budget.
Home/Virtual cards/PropellerAds
AdvertisingPay PropellerAds with a ZyloCard virtual card
PropellerAds runs on prepaid balance top-ups and is popular with affiliates who test many offers, so overspend and messy per-offer tracking are common on one shared card. Some local cards get refused at top-up.
PropellerAds is a self-serve push, pop, and interstitial ad network used by performance marketers.
Why it works
Why pay PropellerAds with ZyloCard
Keep one card per offer, so each PropellerAds spend line maps to a single test.
Keep one card per PropellerAds account, so a review or a failed charge on one never pauses the others.
Top up with crypto and swap in a fresh card within minutes if PropellerAds blocks a method.
Step by step
How to pay PropellerAds in four steps
- 1Fund your ZyloCard balance with USDT, USDC, BTC, or ETH and wait for it to clear.
- 2Issue a card named for the PropellerAds account and set a monthly limit near your ad budget.
- 3In PropellerAds billing, add the card number, expiry, and CVC as the method.
- 4Make it primary, run a small live charge, and confirm the BIN is accepted before scaling spend.
Smart moves before you pay
- ✓Set the limit to match the balance you intend to load so the top-up clears cleanly.
- ✓Approve the 3D Secure prompt PropellerAds runs on the first charge so the account activates.
- ✓Keep the card limit a little above your budget, since ad platforms can bill slightly over on busy days.
FAQ
Straight answers
Often a local card is refused or the limit sits under the top-up. Use a ZyloCard card sized to your deposit.
Yes. Top up once, then issue a separate capped card for each account from the same balance.
Yes. Add the funded ZyloCard card and keep a buffer so threshold charges clear without a pause.