Pre-load the exact deposit on the card, so an MGID top-up cannot run past your test budget.
Home/Virtual cards/MGID
AdvertisingPay MGID with a ZyloCard virtual card
MGID runs on prepaid deposits and takes a limited set of cards, so affiliates without a supported card cannot fund a campaign. A manual deposit model makes it easy to overload a test budget.
MGID is a native advertising network serving sponsored widgets across global publishers.
Why it works
Why pay MGID with ZyloCard
Issue a card MGID takes when a local or prepaid card is refused at deposit.
Keep one card per MGID account, so a review or a failed charge on one never pauses the others.
Top up with crypto and swap in a fresh card within minutes if MGID blocks a method.
Step by step
How to pay MGID in four steps
- 1Fund your ZyloCard balance with USDT, USDC, BTC, or ETH and wait for it to clear.
- 2Issue a card named for the MGID account and set a monthly limit near your ad budget.
- 3In MGID billing, add the card number, expiry, and CVC as the method.
- 4Make it primary, run a small live charge, and confirm the BIN is accepted before scaling spend.
Smart moves before you pay
- ✓Match the card limit to the deposit you plan to make so the charge posts on the first try.
- ✓Approve the 3D Secure prompt MGID runs on the first charge so the account activates.
- ✓Keep the card limit a little above your budget, since ad platforms can bill slightly over on busy days.
FAQ
Straight answers
MGID takes a narrow set of methods. Use a ZyloCard card with a limit at or above your deposit amount.
Yes. Top up once, then issue a separate capped card for each account from the same balance.
Yes. Add the funded ZyloCard card and keep a buffer so threshold charges clear without a pause.